. Ultra high strength tig-welded 4130 long travel A-Arms for added
strength, stability and handling
. Upper A-Arms measures at 3/4” x .065 wall 4130
. Lower A-Arms measures at 1” x .120 wall 4130
. Ball joints come with an extra thick rubber dust cover, 27 degrees of
joint travel, a hardened and
tempered ball pin, and an 11,000 lb. pullout strength (more than twice
the strength of some of our
competitors ball joints)
. Available in black, red, silver, blue, hammertone and (for an
additional charge) chrome
. Bushings and sleeves included for Yamaha only
. Please specify color when placing special order
Note:
. Laegers A-Arms require longer aftermarket shocks and will not function
properly
without them
. Only Silver is available on the image provided
Part #99-0112, #99-0113 Kit Description:
. Upper and Lower A-Arms, Tie Rods, Ball Joints (Uses Stock A-Arm Pivot
Bushings and Sleeves)
Part #99-0100, #99-0101 Kit Description:
. Upper and Lower A-Arms, Tie Rods, Ball Joints (Uses Stock
A-Arm Pivot Bushings, Caps and Sleeves)
Part #99-0102, #99-0103 Kit Description:
. Upper and Lower A-Arms, Tie Rods, Ball Joints (Uses Stock A-arm Pivot Bushings, Caps, Sleeves
and Bolts)
Part #99-0125, #99-0126 Kit Description:
. Upper and Lower A-Arms, Tie Rods, Ball Joints
|
