|
|
After many years of listening to rider feedback, we have found that
satisfaction with a helmet - any helmet - starts with your
understanding the importance of fit. Most importantly, understanding
how proper size and fit affect how a helmet performs during everyday
riding, and how uninformed purchasing decisions can affect that
performance.
While getting the proper size and fit on something as important and
personal as a helmet can occasionally even be difficult in person in
a store, this difficulty can be greatly compounded when your only
contact is via phone, fax or email and there is no hands-on,
in-person help with the fitting process. Which is why, with little
or no actual firsthand knowledge at your disposal on how to size and
fit a helmet, Arai sincerely encourages you to not make this
decision lightly. (Any price savings are soon negated by having to
wear a helmet that feels and fits wrong every time you put it on!)
1. MEASURING: Have someone measure
the circumference of your head with a cloth measuring tape –
available cheaply at any fabric store - taking special care to
measure at the largest circumference (i.e. where your head is
biggest; typically at just above the eyebrows, around the head to
include the largest “bump” at the back of your head.) The tape must
be pulled tight, and the measurement taken.
2. SNUG VS. LOOSE: A helmet that slips on easily may offer an
initial impression of comfort and proper fit, but after time can
become too loose and move around on your head, allowing more wind
noise to get in and also causing more discomfort and fatigue as you
struggle to keep your head from getting buffeted in the wind. Like a
properly-fit pair of shoes, a helmet needs to settle in over time,
so be sure to consider this “relaxing” of the interior when buying
your new helmet. Your initial fitting goal, then, should be for a
snug fit.
3. FACIAL FIT: This is a common problem with riders who have
a full face, jaw, or cheeks because it often results in the mistake
of “fitting your face” instead of your head, and choosing a larger
size in order to get the helmet on past your face. The problem is
compounded again because in a mail-order/Internet purchase there is
no in-person helmet fitter to help. Remember, first get your correct
head size (Step #1 and link). You’ll yell and scream the
measured-size will never fit, but respectfully, we’ve heard that
before. When you order your helmet, consider ordering one of Arai’s
optional thinner-cheek pad sets for your model. Swap the pads to the
thinner ones. Bingo!
4. SIZE COMPARISONS: The helmet size you’re wearing now
doesn’t count in ordering a new helmet. A previous or current helmet
in the same brand, model and size - even if an Arai - may not offer
the same fit as a current model or size you’re considering. Why? The
natural evolution of design and the use of new materials can affect
– and alter - the size and fit of a new model. Arai offers several
interior shapes to give you the most possible opportunities to find
one that best fits your head shape. How can you determine which is
best suited for you? In general, Arai interiors for the North
American markets are based on an oval shape orientation (somewhat
longer front-to-back and a little narrow from side-to-side). Our
models then vary slightly based on that general Oval shape to
accommodate a much wider fit range LONG OVAL (very long
front-to-back, very narrow side-to-side). On this end of the scale,
we have the new Profile model, offering additional forehead room for
those who find that most helmets have pressure points in the
forehead.
INTERMEDIATE OVAL (a little shorter front-to-back and a
little wider side-to-side). This next fit package comes in our RX-7
CORSAIR model, which begins the shift from oblong towards round.
ROUND OVAL (even a little shorter front-to-back and a little
wider side-to-side). This last fit package is shared between our
Quantum-2 and Astral-X models. However, because the Quantum-2 has a
fully removable liner and the Astral-X has a non-removable head
liner, side-by-side fit comparisons can
reveal a personal preference for one over the other.
|
|
