WARNING: California’s Proposition 65
Proposition 65 Warning for California Consumers
Bell Moto-9 Flex Tagger Mayhem Adult Off-Road Helmets
The Bell Moto-9 Flex Helmet introduces an innovative protective technology to Bell's flagship dirt helmet. Featuring a first-of-its-kind three layer impact liner, the Bell Moto 9 Flex Helmet provides impact protection through varying methods for specific impact speeds. This "Progressive Layering Technology" has been developed to manage energy from three potential impact scenarios - low, mid and high. The three layer system consists of (EPO) Expanded Polyolefin which works hand-in-hand with the traditional (EPS) Expanded Polystyrene and (EPP) Expanded Polypropylene.
In addition to this leap forward in terms of protection, the three layer system also provides an adaptive fit as the segmented construction automatically conforms to a rider's head for a better fit and more predictable energy management.
|Standard Size||Hat Size||Inches||Centimeters|
|4XS||6 3/8||20 1/16||51|
|3XS||6 1/2 - 6 5/8||20 1/2 - 20 7/8||52-53|
|2XS||6 3/4 - 6 7/8||21 1/4 - 21 5/8||54-55|
|S||7 1/8||2 3/8||57|
|M||7 1/4 - 7 3/8||22 3/4 - 23 1/4||58-59|
|L||7 1/2||23 5/8||60|
|XL||7 5/8 - 7 3/4||24 - 24 3/8||61-62|
|2XL||7 7/8 - 8||24 3/4 - 25 1/4||63-64|
|3XL||8 1/8 - 8 1/4||25 5/8 - 26||65-66|
|4XL||8 3/8 - 8 1/2||26 3/8 - 26 3/4||67-68|
Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet. A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.
Measure the circumference of the head at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to use.