WARNING: California’s Proposition 65
Proposition 65 Warning for California Consumers
The Bell RS-1 helmet bridges the gap between the Vortex and the top-of-the-line Bell Star. The Bell RS-1 Emblem Helmet features all the technicality of the RS-1 combined with visually striking Bell logo graphics.Starting with a lightweight Kevlar/fiberglass composite shell, the RS-1 brings it with Bell’s vaunted Velocity Flow Ventilation system providing cool comfort, a super stable aerodynamic profile keeping the helmet still at speed, and the versatile Click Release shield system for fast, easy shield swaps…not to mention an amazing variety of tint and coating choices. The Bell RS-1 Helmet should be a game changer in the mid-high end helmet assortment. The RS-1 Helmet will prove its worth on track and street alike.
|Standard Size||Hat Size||Inches||Centimeters|
|4XS||6 3/8||20 1/16||51|
|3XS||6 1/2 - 6 5/8||20 1/2 - 20 7/8||52-53|
|2XS||6 3/4 - 6 7/8||21 1/4 - 21 5/8||54-55|
|S||7 1/8||2 3/8||57|
|M||7 1/4 - 7 3/8||22 3/4 - 23 1/4||58-59|
|L||7 1/2||23 5/8||60|
|XL||7 5/8 - 7 3/4||24 - 24 3/8||61-62|
|2XL||7 7/8 - 8||24 3/4 - 25 1/4||63-64|
|3XL||8 1/8 - 8 1/4||25 5/8 - 26||65-66|
|4XL||8 3/8 - 8 1/2||26 3/8 - 26 3/4||67-68|
Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet. A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.
Measure the circumference of the head at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to use.