WARNING: California’s Proposition 65
Proposition 65 Warning for California Consumers
GMAX GM-11S Trapper Adult Snow Helmets (Brand New)
Redesigned streamline mouth vent for maximum air flow when in the opened position Visor has been aerodynamically designed to allow airflow to pass uninterrupted across the helmet to virtually eliminate helmet-lift at high speeds Helmet can be quickly converted from a visor configuration to a visor-less configuration, Helmet includes clear dual lens shield, cold weather breath box and chin curtain, visor and side plate covers for use when visor is removed to give the helmet a clean full face street look Clear shield is completely hidden under the visor and out of line-of-sight, when in the fully raised position, Large eye port that accepts even the largest goggles Shield can be fully raised or lowered when using goggles, Top, front, and jaw piece vents are a bold design that can be fully opened or closed with a gloved hand, Plush removable washable comfort liner, Removable washable cheek pads. Different sizes available for purchase to obtain a custom fit, Integrated speaker pockets in cheek pads will except most communication devices, Dot Approved And Meets Fmvss 218 Standard.
New or Brand New - Brand new item in original packaging (original manufacturer's warranty may apply).
Refurbished - Professionally restored and in perfect working condition. Original packaging may be missing or slightly damaged.
Used - Item has seen limited use but remains in good working condition. May show some limited signs of wear with small scratches or cosmetic blemishes. May arrive with damaged packaging or be repackaged.
Refurbished, Without Tags - Same as refurbished. Item may arrive with mising labels or tags.
Refurbished, Last Call - Same as refurbished. Last call or closeout item.
| ADULT HELMETS | |||
|---|---|---|---|
| Size | U.S. Hat Size | Inches | CM |
| S | 6 3/4 - 7 | 21 5/8" - 22" | 55-56 cm |
| M | 7 1/8 - 7 1/4 | 22 7/16" - 22 13/16" | 57 - 58 cm |
| L | 7 3/8 - 7 1/2 | 23 1/4" - 23 5/8" | 59 - 60 cm |
| XL | 7 5/8 - 7 3/4 | 24" - 24 3/8" | 61 - 62 cm |
| XXL | 7 7/8 - 8 | 24 13/16" - 25 3/16" | 63 - 64 cm |
| XXXL | 8 1/8 - 8 1/4 | 24 13/16" - 25 3/16" | 63 - 64 cm |
| XXXXL | 8-3/8 | 26 3/8" - 26 3/4 | 67 - 68 cm |
| YOUTH HELMETS | |||
|---|---|---|---|
| Size | U.S. Hat Size | Inches | CM |
| YOUTH S | 6 1/8 - 6 1/4 | 19 5/16" - 19 11/16" | 49 - 50 cm |
| YOUTH M/XXS | 6 3/8 - 6 1/2 | 20 1/16" - 20 7/16" | 51 - 52 cm |
| YOUTH L/XS | 6 5/8 - 6 3/4 | 20 7/8" - 21 1/4" | 53 - 54 |
A properly fitted helmet will improve many aspects of your ride. It will make you more comfortable by not creating hot spots. It will make you more aware of your surroundings by dampening noise and increasing visual clarity. In the event of an accident, a helmet that fits your head properly will have the best chance of protecting you from injury. The helmet fitting methods described here are focused on fitting for full face helmets. Many of these same techniques will apply to 3/4 and half-helmets as well. When trying on helmets in your local shop, seek the advice of parts and accessories experts. They will be glad to help.
To find your approximate size measure the circumference of your head one-inch above eyebrows and across the largest portion of the back of your head. Cross reference this measurement on the helmet size chart to determine the approximate size.
When trying on a helmet, the first area to focus on is the crown. Make sure that the crown of the helmet matches the shape of your head. It should fit like a comfortable hat with equal pressure around the circumference of your crown.
To test the fit of the helmet place one hand on the back of the helmet and push forward. Check to see if you can create a gap on your forehead. If you can insert more than the very tip of your finger in-between the inside of the helmet and your head then you should try a smaller size. If that smaller size fits your crown but is too tight on your face, see if there is a thinner cheek pad available to relieve the pressure on your face. If you are unsure which size fits best then remove the cheek pads from each helmet and try them on without the pads. This will give you the best indication of which helmet to choose.
The way cheek pads fit can make a huge difference in the way a helmet feels. Too tight and you'll be uncomfortable. Too loose and the helmet will be noisy and will move around when riding. There is some amount of personal preference when selecting the proper size. The cheek pads will break in substantially in the first couple hours of riding so go with the tightest fit you can comfortably wear.
Once you have the crown and cheek pads where you want them, you can then check for helmet stability. Without the chin strap fastened, grab the helmet from the rear and see if you can roll it forward off of your head. You should feel it grip the back of your head and resist rolling forward off of your head. If the helmet does roll forward off of your head, try a smaller size or a different model.
You can see if a helmet fits correctly by looking in the mirror. The brow of the helmet should comfortably rest somewhere between just above your brow bone to one inch (25mm) above your brow. Grab the chin bar and move it lightly side to side. You should see and feel the cheek pads remain in contact with your face.
Note: Sizing information is provided by the manufacturer and does not guarantee a perfect fit.
