Save Up to 15% Off On All Pickup Orders SHOP NOW

COLLECTIONS


NEW ARRIVALS

ON SALE
Arai XD Face Shield Helmet Accessories (Brand New)
ON SALE
Arai MXC-Pro/VX-Pro Type IV LG Head Liner Helmet Accessories (Brand New)
ON SALE
Arai XC Face Shield Helmet Accessories
3 COLORS
(Save 40%)
$61.17 $101.95
ON SALE
Arai 3-Snap Visor Helmet Accessories (Brand New)
ON SALE
Arai RX-7RR4 Type II SM Head Liner Helmet Accessories (Brand New)
ON SALE
Arai MXC/CL Earcup Pad Helmet Accessories (Brand New)
ON SALE
Arai DDL 3 Duct Rear Vent Helmet Accessories (Brand New)
ON SALE
Arai MXC-Pro/VX-Pro Type III MD Head Liner Helmet Accessories (Refurbished)
ON SALE
Arai VAS-V Pro Shade System Face Shield Helmet Accessories (Refurbished)
ON SALE
Arai SAI Pro Shade System Face Shield Helmet Accessories (Refurbished)
ON SALE
Arai SAI Pinlock Ready Face Shield Helmet Accessories (Refurbished)
ON SALE
Arai IC 2 Duct Front Vent Helmet Accessories (Brand New)
3 COLORS
(Save 40%)
$5.37 - $5.97 $8.95 to $9.95
ON SALE
Arai Corsair V/RX-Q/Signet-Q Cheek Pad Helmet Accessories (Brand New)
ON SALE
Arai XV Cheek Pad Helmet Accessories (Brand New)
ON SALE
Arai RX-7RR4 Type IV LG Head Liner Helmet Accessories (Brand New)
ON SALE
Arai RX-7RR4 Type II SM Head Liner Helmet Accessories (Brand New)
ON SALE
Arai Classic R Earcup Pad Helmet Accessories (Brand New)
ON SALE
Arai Vector Cheek Pad Helmet Accessories (Brand New)
ON SALE
Arai Signet Series Screw Set Helmet Accessories (Brand New)
ON SALE
Arai SAG-2 Kurtis Shield Cover Helmet Accessories (Brand New)

LOOKBOOKS


PRODUCT CARE

All Arai face shields have a very strong anti-scratch coating to extend the useable life of the shield. The polycarbonate material used to manufacture the shield is very strong and durable, but is not shatterproof or impervious to damage. Products such as brake fluid, degreaser, gasoline and even gasoline fumes can quickly, easily, and often invisibly weaken the shield. Take great care not to expose your shield to any chemicals. Face shield cleaning should be done only with warm water and a micro fiber cloth. Laying a microfiber cloth, soaked in warm water, across the shield will soften the bug debris and make cleaning easier. Once cleaned, protecting the shield surfaces with an all natural carnauba wax will not only help bead rain water but reduce the amount of dirt build up as well.

To prolong the usable life of your helmet, it is important that you clean it regularly. This does not mean a full strip-down wash every time, that level of clean can be reserved for once or maybe twice a season. More frequent, routine cleanings can be as simple as a quick wipe down with a wet towel, or a limted wash of the easily removable parts. After every ride, we encourage you to wipe the residual sweat from the surface of the interior lining. If you use sun block, makeup or hair products, you may want to pull out the cheek pads and head liner and give them a quick rinse in the sink. Build up of these products can become difficult to remove after a while. For some advise on a full wash of your helmet, inside and out, check out this video.

FINDING YOUR HELMET'S MANUFACTURE DATE

Your helmet's manufacture date will be located in one of three places, it will be on the:
The Chinstrap D-Ring (Late 2000's to Present):
On a white tag on the long side of the chinstrap (Mid 2000's):

Stamped into the leatherette of the chin strap (Early 2000's):

FIT INFORMATION

As market trends change over time, we assess and adapt to those changes. Therefore, standard interior component sizes may change from time to time. Please refer to the chart below for the most current standard interior liner sizes.

SIZING GUIDE

Arai Helmets Size Charts
Size Centimeter
2XS 51 - 52
XS 53 - 54
SM 55 - 56
MD 57 - 58
LG 59 - 60
XL 61 - 62
2XL 63 - 64
2XL 63 - 64
3XL 65 - 66

*  Sizing information is provided by the manufacturer and does not guarantee a perfect fit.

Innovation in pursuit of a better riding experience.
Our mission has always been the protection and comfort of riders. Every Arai helmet is 100 percent handmade. We don’t build Arai helmets to meet any safety standards; we build them to exceed the standards. The foundation principles of protection formulated over three generations have never been forgotten in six decades of helmet design and manufacturing.

Family Philosophy
Arai is a small, family company, driven by the same family, with the same mission, through three generations – three generations of riders. We see riders wearing our helmets, and we hope they know we made their helmets to the best of our ability, to protect and make them feel comfortable no matter how far or how long they ride. We build your helmet by hand. We each have a specific job, yet all of us know every step that goes into building it. That is how we learn there are no minor parts to an Arai helmet, and there are no minor jobs here. We build each Arai helmet as if we’re creating it for one of our own, a brother, a father, a husband, a sister. That is what makes every one of us Arai.

Technical Philosophy
At Arai, safety standards like Snell or DOT are our baseline, not our goal. Standards create minimum criteria, but, while many helmet makers design their helmets to meet those minimums, “good enough” has never been good enough around here. Our standards are made for the real world, the world of distracted drivers, unpredictable situations, sharp angles – things that don't move when you hit them. A world you can’t duplicate in a controlled, predictable testing laboratory environment.