HJC sponsored racer, Toni Elias, had already secured the primary spot for the 2017 MotoAmerica Championship even before the final round in Alabama. Toni Elias was formerly the 2010 Moto 2 World Champion. In 2016, he landed on the second place during his first MotoAmerica Race, only 7 points behind 1st placer Cameron Beaubier. 2017 had provided a good start for Elias when he won Races 1 & 2 at Circuit of the Americas in Austin. He was sporting the RPHA 11 Boba Fett back then. He had won 1st place in 7 races and finished off 2nd in 8 races out of 16 races leading up to New Jersey.
Currently, Elias wears the RPHA 11, HJC’s premium, lightweight race helmet. However as a big supporter of HJC’s special graphics, Elias had worn over the past two MotoAmerica race seasons HJC helmets with the Star Wars and Marvel graphics including Boba Fett, Kylo Ren, Spider-Man, Venom and, even, Captain America. He has sported also the #95, Lightning McQueen.
It is no wonder that world racers like Elias choose HJC RPHA 11 Pro. It is built for the fast and challenging ride. It has an aerodynamic shell structure for extreme performance at maximum speeds. The HJC RPHA 11 Pro helmet offers comfort from start to finish of every race with its vent technology. With the brand new forehead vent, air intake at the forehead allows effective cooling around the riders’ crown. Additionally, rubber trim on each vent control gives a good tactile feel for easy and precise adjustments for the Max Air-flow Top Vent. Reflective patches are also attached near the rear for safety enhancement. As for vision, the EPS is designed to be eyewear-friendly so riders may wear eye glasses or sunglasses. An enlarged eye port provides better increased view for the rider as well.
Interior is of advanced anti-bacteria fabric provides enhanced moisture wicking and quick drying function than previous generation. (Fully removable and washable interior)
“ACS” Advanced Channeling Ventilation System.
Premium Integrated Matrix Plus(PIM+) . Carbon fiber, aramid, fiberglass, organic non-woven fabric create a unique woven blend that produces a shell both remarkably strong and noticeably lighter.
Simple and secure shield ratchet system provides ultra-quick, tool-less removal and installation for efficient operations.
DOT & ECE approved
|TOP VENT||REAR VENT||LOWER VENT||CHIN CURTAIN||CHIN STRAP COVER||GEAR PLATE SET (HJ-26)|
Liners are interchangeable only within the same EPS.
|EPS 1||EPS 1||EPS 2||EPS 2||EPS 3||EPS 3|
Cheek pads are interchangeable in all helmet sizes.
|45 mm||40 mm||35 mm||30 mm||30 mm||25 mm|
The size chart is only for reference. Always try the helmet on and follow the owner’s manual’s instructions for a proper fit.
|HELMET SIZE (cm)||54-55||55-56||57-58||58-59||60-61||62-63|
|CHEEK PAD SIZE (mm)||45||40||35||30||30||25|
|LINER SIZE (mm)||12||9||12||9||12||7|
MSRP $575 CONSTRUCTION 1000g (2.2 pounds) TeXtreme Spread tow carbon fiber shell In-mold PC around vent openings a...
TRINITY PRO GLO LIMITED EDITION | GEAR SETS Every choice and every sacrifice before the race impacts your results....
Shop For Alpinestars