MATT BLACK GLOSS ORANGE
WHITE BLUE RED
WHITE GREEN PINK
BLACK YELLOW ORGANE
Perhaps the best value on the market in a lightweight, MX helmet, LS2's Fast is a technically advanced weapon for serious off road riders. The shell is made from our technically advanced Kinetic Polymer Alloy, (KPA). This innovative material is ultra-lightweight and offers a bit of energy absorbing flexibi- lity, but with a penetration resistance that rivals high-end composites.
LS2 offers multiple shell sizes, specifically sized EPS protective liners and our high quality, high performance comfort padding with LS2’s exclusive 3D Laser Cut Foam for the perfect fit and all-day comfort.
| ADULT SIZES | HEAD CIRCUMFERENCE |
|---|---|
| XXS | 51-52 cm |
| XS | 53-54 cm |
| S | 55-56 cm |
| M | 57-58 cm |
| L | 59-60 cm |
| XL | 61-62 cm |
| XXL | 63-64 cm |
| JUNIOR SIZES | HEAD CIRCUMFERENCE |
|---|---|
| S | 47-48 cm |
| M | 49-50 cm |
| L | 51-52 cm |
| XL | 53-54 cm |
Removable and Washable
Comfort Liner
Breathable
Hypoallergenic
Laser-Cut Foam
To ensure good protection the helmet must fit your head to perfection, special attention should be paid to the shell shape design and materials to minimize the effects of a possible impact. It is key to obtain a perfect fit to your head from outside to inside, as well as the shell, the configuración of the EPS liner, which should match closely the human head shape.
This model uses a classic double D‐ring buckle system for a secure fit. Slide the strap through BOTH D‐rings, and then wrap it over the first and through the second. Pull the strap until you have a snug fit that won't roll off.
Our emergency release system allows emergency responders to remove the cheek pads from the helmet, allowing extra space to remove the helmet with minimal movement of a fallen rider's head and neck. It is best to have someone hold the helmet to keep it from moving as you remove the pads. Slide your finger into the red loop and pull carefully, slipping the pads free. Slide the cheek pads over the straps and pull them away from the helmet.
Reinforced Chin Strap
This small metal triangle is an LS2 exclusive feature and reinforces the attachment of our chinstraps to the shell for extra strength.
Multi-Density EPS
LS2 helmets feature a Dynamic Flow-through Ventilation. Fully adjustable intake ports and vented EPS work with the rear spoiler and exhaust ports to create a constant, light flow of air helping to keep the rider cool and comfortable.
Channeled Ports
Top Vents
Chin Vents
Side Vent
Exhaust Port
THE WORLD’S PREMIER OPEN-FACE HELMET Thanks to contemporary styling along wi...
The Call To Arms™ motorcycle boot from Speed and Strength is built for the long haul, w...
Black Gray/Black Keep it moving as the mercury rises, with The RADAR LOVE™ me...
